Panel Type C4TT - Technical Specification

Manufacturing Tolerances	Wood Core - High Performance Chipboard
Manufacturing Tolerances	C4TTL Light	C4TTM Medium	C4TTH Rolling load
Length/width 600mm Thickness 29mm Concavity/convexity Twist Diagonal difference	± 0.2mm ± 0.2mm max 0.4mm max 0.4mm max 0.4mm	± 0.2mm ± 0.2mm max 0.4mm max 0.4mm max 0.4mm	± 0.2mm ± 0.2mm max 0.4mm max 0.4mm max 0.4mm

Panels are manufactured within dimensions and tolerances on fully automated production lines with regular testing and inspection taking place at every stage of the production process. This is an important factor during construction projects as consistency of product quality promotes problem free installation.

Go to top

Load Bearing Capacity	Wood Core - High Performance Chipboard
	C4TTL Light	C4TTM Medium	C4TTH Rolling load
	Indenter 25mm x 25mm applied to weakest point of panels
United Kingdom PSA MOB PF2 PS Deflection < 2.5mm in 24h test on pedestals. 800mm ffh. S.F. > 3 times. Uniform distributed load.	> 1.5kN > 6.7kN	> 3.0kN > 8.0kN	> 3.0kN > 8.0kN
France NF P 67 101 Deflection < 2.5mm in 15' test on pedestals. 600mm ffh. S.F. > 2 times. Uniform distributed load.	> 3.0kN > 15.0kN	N.Q. N.Q.	N.Q. N.Q.
Italy UNI 10467-4 Deflection < 2.5mm in 5' test on rigid blocks. S.F. > 2 times. No request for UDL.	> 3.0kN	> 4.5kN	> 5.0kN
European Union EN 12825-2001 Deflection < 2.5mm in15' test on rigid blocks. S.F. > 3 times. Breaking point.	3.A.1. 8kN	4.A.1. 9kN	5.A.1. 10kN
U.S.A. C.I.S.C.A. Deflection < 1" in 5' test on rigid blocks. S.F. > 2 times.	> 675lb	> 1020lb	> 1150lb
JVP Internal Q.A. Deflection < 2.5mm in 5' test on rigid blocks. S.F. > 3 times. Uniform distributed load.	> 3.0kN > 18kN	> 4.5kN > 20kN	> 5.0kN > 22kN

Load bearing capacity is one of the most important factors in satisfying customer requirements. Panels are fully tested to the UK PSA MOB Standards which are the most stringent in the world.

Go to top

Fire Ratings	Wood Core - High Performance Chipboard
Fire Ratings	C4TTL Light	C4TTM Medium	C4TTH Rolling load
United Kingdom B.S. 476 & PSA MOB Part 6. Part 7. Part 4 - part 20.	Class 1 Rat. 0 30'	Class 1 Rat. 0 30'	Class 1 Rat. 0 30'
France NF P 67 101 NF P 92 501.	M1	M1	M1
Italy UNI 10467-4 Fire reaction CF RF. Fire resistance.	Class 1 R.E.I. 30'	Class 1 R.E.I. 30'	Class 1 R.E.I. 30'
European Union EN 12825-2001 Reaction EN 13501-1. Resistance EN 13501-2.	Class 1 R.E.I. 30'	Class 1 R.E.I. 30'	Class 1 R.E.I. 30'
U.S.A. C.I.S.C.A. NFPA 75.	Class 1	Class 1	Class 1

Directives on behaviour in case of fire are concerned with two main issues Fire Reaction (no flame transmission, no fire load contribution) and Fire Resistance (mechanical resistance, emission of poisonous smoke, insulation of temperature). The ratings are intended to grant due time for full evacuation of buildings in the event of a fire hazard. Mechanical resistance and surface temperature are therefore significant factors.

Go to top

Noise Reduction	Wood Core - High Performance Chipboard
	C4TTL Light	C4TTM Medium	C4TTH Rolling load
	ISO 140-12 bare panels without acoustic barriers
Part 9 - airborne noise. ISO 717-1 Dn₁ f₁ W Part 6 - impact noise. ISO 717-2 Ln₁ W	42dB 68dB	46dB 69dB	46dB 69dB

Noise levels contribute to personal stress in the workplace. Consequently, it is important that floor panels perform well to absorb noise in order to avoid potential health problems for building occupants.

Go to top

Electrical Conductivity	Wood Core - High Performance Chipboard
Electrical Conductivity	C4TTL Light	C4TTM Medium	C4TTH Rolling load
United Kingdom BS 7671 IEE 16th edition. Equipotential bonding.	0.2 ohm	0.2 ohm	0.2 ohm
European Union EN 18815 ohm	With covering applied
European Union EN 18815 ohm	from 10 to the power of 7 to 10¹º	from 10 to the power of 7 to 10¹º	from 10 to the power of 7 to 10¹º
U.S.A. NFPA 99 ohm.	from 10 to the power of 7 to 10¹º	from 10 to the power of 7 to 10¹º	from 10 to the power of 7 to 10¹º

The product fully complies with equipotential bonding standards as well as human safety antistatic requirements.

Go to top

Environmentally Friendly	Wood Core - High Performance Chipboard
	C4TTL Light	C4TTM Medium	C4TTH Rolling load
	All panels within the range can be considered as environmentally friendly. Firstly, during the production process, more than 85% of production waste is recycled. The wood core is made from either 100% recycled wood or is sourced from sustainable forest conservation areas. Glue used is water-soluble and the steel supplier recycles all scrap.

Go to top